Aphex 5200 Manual de usuario

To remotely control an external HA, press the rack in which the external HA you want to control is mounted. The EXTERNAL HA popup window will appear.

To remotely control the external HA from an input channel of the M7CL, use the navigation keys to access the OVERVIEW screen that includes the channel

Press the input port popup button, and select the input port assigned to the external HA. With these settings, the external HA can be used in the

For PM5D users: HA (Head Amp) screen In this screen you can make settings such as phantom power (+48V), gain, and HPF on/off settings for each of the

1. DISPLAY MODE- Select one of the following as the type of head amp displayed in the screen. • INTERNAL HA (PM5D-RH/DSP5D) The internal head amp c

Network Settings Each 1788A and 188 must be set to a different device ID number. (The Yamaha AD8HR ID numbers are automatically set by the cons

For the 188 follow these instructions: Turn the encoder clockwise until you get to a screen that shows SYSTEM CONFIGURE. In order to safeguard again

1. REMOTE FUNCTION. This parameter selects a device to be connected to the DM1000 REMOTE connector. 2. HA section. This section enables you to specif

For DM2000 users: You can control the parameters of up to 12 preamps from the DM2000 by connecting the DM2000ʼs REMOTE port to the Aphex 5200 using a

1. Use the SELECTED CHANNEL PHASE/INSERT [DISPLAY] button to select the HA Control page. 2. Use the cursor buttons to select the ID of the HA (pream

For M7CL users: To set up an external HA, you will use the EXTERNAL HA popup window on the M7CL-32/48. These popup windows are collectively referred t

1. EXTERNAL HA field- This field shows the state of the connected external HA. 2. ID / Model name / +48V master This displays information for the e

4. EXTERNAL HA PORT SELECT popup button (M7CL-32/48)- This button accesses the EXTERNAL HA PORT SELECT popup window, where you can specify the input